However, in case of any hardware damage or phone warranty termination caused by TestPoint procedure Smart-Clip developer does not bear any responsibility. The handset display will remain blank. Alternatively, the handset can be connected using a TestPoint method. Phone doesn’t have to turn on! Log to “Flash” tab.

Uploader: Gardazuru
Date Added: 14 February 2005
File Size: 65.82 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 53258
Price: Free* [*Free Regsitration Required]

The phone may not accept unlock code if the wrong unlock code was entered too many times and Wrong Code Counter is filled.

Please note that with some models there is a single contact that motorola locosto usb be grounded connected to the metal coverothers have two contacts that should be connected to each other.

Log to bookmark “Prepare”.

Remove the battery from the phone as soon as reboot procedure starts. Use the TestPoint for each specific phone model motorola locosto usb follow the step-by-step instruction strictly. If the phone powers on before Repair procedure completes, repeat whole operation from the beginning.

At the stage 11, handset screen motorola locosto usb display a “Critical error” Erasing flash memory error 80 message. Please do not use any HUB or extension cable.

No need to perform a Clip Login to access TP motorola locosto usb. Log to “Flash” tab. If the set stays in Flash mode, phone model has to be selected manually.

The Smart TestPoint v2. The next steps depend on the phone boot version. The handset restarts and can be disconnected.

SmartMoto Unlocking Manual. Smart-Clip is a professional device for unlocking cell phones.

The prepare cycle starts. After that motorola locosto usb to bookmark “Flash”, press “Enter flash mode” and mootrola motorola locosto usb the step However, in case of any hardware damage or phone warranty termination caused by TestPoint procedure Smart-Clip developer does not bear any responsibility. Press “Enter flash mode”. Please remember to update Smart-Clip first and perform S-Card update after that only.

To install the driver: After the first Smart-Clip update and account registration at www. Smart-Clip2 Pack 5 Activation.

FuriousGold® The World Famous Unlocking Tool 6 years of non-stop updates

If the handset was connected to SmartMoto, in boot mode the temporary motroola file will not be created. Motorola locosto usb of charge download of SmartMoto is available at our web site.

Make sure that phone model and boot motorola locosto usb of the phone to be unlocked exactly match the model and boot version stated in the list. Please disconnect the phone from the cable, remove and insert the battery, switch the phone to boot mode and perform unlock again. SmartMoto creates a Temporary Backup File from the handset firmware. The handset motorola locosto usb be detected by SmartMoto as “S Blank TestPoint schematics are located ysb Public Downloads section of www.

Wait till the process finishes.

V3i – boot versions motorola locosto usb from A. It is operated by one button and requires to be powered from mains adapter or even 9V battery.

Enter “zero” 8 times. No need to install the phone model driver. Use any other alternative tool to cut or drill it.